DEWALT DWARA100 Right Angle Attachment

#ad
#ad
Dewalt DWARA100 #ad - Allows for tighter access with your current impact driver, with increased gear strength. Ring magnet secures fastener, and helps to reduce slipping & wobble. Fasteners supported by ring magnet. Impact-rated gears allow for more than 2, 000 life-cycles. Milwaukee 48-32-2100 in Milescraft 1302. Better accessibility to drive screws and drill holes in tight spaces.

Better accessibility for tight Spaces, Impact Ready Performance - Designed for Use in Impact Drivers. The sure set system floating magnet secures fasteners for you - no more trying to hold screws in sweaty fingers. In comparison the dwara50 features up to 2x longer life and no magnet, while the dwara100 has up to 5x long life and a magnet and the dimensions from tip to back on the DEWALT DWARA100 measures one inch giving users a tool to fit into even some of the smallest spaces Right-angle attachment for impact driver, 5X longer life on average vs.

DEWALT DWARA100 Right Angle Attachment #ad - Better accessibility to drive screws and drill holes in tight spaces, Fasteners supported by ring magnet. Ergonomic abs handle does not get hot while in use, Allows for tighter access with your current impact driver, with increased gear strength. Sure-set system floating magnet Secures Fasteners, True 90 degree head allows tight access when using 1" bit tip.

Ergonomic abs handle does not get hot while in use. Impact-rated gears allow for more than 2, 000 life-cycles. This right-angle attachment for DEWALTR impact drivers allows you to reach into tight places for easier driving.

More information about Dewalt DWARA100 #ad

Neiko 11402A Stubby Drill Bit Set for Metal, 5 Piece | 1/4-Inch Quick Change Hex Shank | M2 HSS Steel

#ad
#ad
Neiko 11402A #ad - Each stubby bit measures from 1. 9 inches to 2. 32 inches for working in hard-to-reach tight spaces with short and right angle drills. 135 degree standard tip design delivers powerful penetration against metals, plastics and other hard surfaces. The neiko quick change stubby drill bit set includes a plastic hex-shank holder and the following bit sizes: 3/32, 3/16, 1/8, 1/4 and 5/16-inch bits.

1/4-inch hex shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs. The 5pc drill bit set includes a hex shank holder and the following bit sizes: 3/32, 3/16, 1/8, 1/4 and 5/16-inch drill bits. Short bits are constructed of premium molybdenum M2 high speed steel with evenly distributed carbides for resistance against wear.

More information about Neiko 11402A #ad


Similar products



DEWALT DWARAFS Right Angle Flex Shaft, 12"

#ad
#ad
Dewalt DWARAFS #ad - These have a Rapid Load design for quick bit changes. 135 degree standard tip design delivers powerful penetration against metals, plastics and other hard surfaces. True 90 degree right angle head for versatility. Fasteners supported by magnet for 100% alignment. Short bits are constructed of premium molybdenum M2 high speed steel with evenly distributed carbides for resistance against wear.

The dewalt dwarafs 12-inch right angle flex Shaft features a true 90 degree right angle head for versatility. Shank. The 5pc drill bit set includes a hex shank holder and the following bit sizes: 3/32, 3/16, 1/8, 1/4 and 5/16-inch drill bits. Rapid load quick bit changes. 1/4-inch hex shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs.

DEWALT DWARAFS Right Angle Flex Shaft, 12" #ad - The flexible shaft allows you to reach nearly any space, Side handle for additional leverage and support, and the Hex shank accepts any 1/4 In. Each stubby bit measures from 1. 9 inches to 2. 32 inches for working in hard-to-reach tight spaces with short and right angle drills. The fastener is supported by magnet for 100% alignment.

More information about Dewalt DWARAFS #ad


Similar products



Neiko 11401A Stubby Drill Bit Set for Wood, 6 Piece | 1/4-Inch Quick Change Hex Shank | 4241 HSS Steel

#ad
#ad
Neiko 11401A #ad - Short bits are constructed of 4241 high speed steel for fast cutting against tough wood material. Fasteners supported by magnet for 100% alignment. Each stubby bit measures at a length of 2. 3 inches for working in hard-to-reach tight spaces with short and right angle drills. The 6pc drill bit set includes a hex shank holder and the following bit sizes: 3/32, 3/16, 1/8, 1/4, 5/16 and 3/8-inch drill bits.

Each stubby bit measures from 1. 9 inches to 2. 32 inches for working in hard-to-reach tight spaces with short and right angle drills. Flexible shaft reaches nearly any space. Short bits are constructed of premium molybdenum M2 high speed steel with evenly distributed carbides for resistance against wear. 135 degree standard tip design delivers powerful penetration against metals, plastics and other hard surfaces.

Neiko 11401A Stubby Drill Bit Set for Wood, 6 Piece | 1/4-Inch Quick Change Hex Shank | 4241 HSS Steel #ad - 1/4-inch hex shanks are compatible with both standard and quick change chucks drivers, providing versatility in drilling needs. 1/4-inch hex shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs. Brad point tip design delivers accuracy when drilling through surfaces.

True 90 degree right angle head for versatility. The neiko quick change stubby drill bit set includes a plastic hex-shank holder and the following bit sizes: 3/32, 1/8, 3/16, 5/16 and 3/8-inch bits.

More information about Neiko 11401A #ad


Similar products



DEWALT DWASHRIR Impact Ready Shears Attachment

#ad
#ad
Dewalt DWASHRIR #ad - This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. Short bits are constructed of 4241 high speed steel for fast cutting against tough wood material. 1/4-inch hex shanks are compatible with both standard and quick change chucks drivers, providing versatility in drilling needs.

True 90 degree right angle head for versatility. 1/4-inch hex shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs. Flexible shaft reaches nearly any space. Each stubby bit measures at a length of 2. 3 inches for working in hard-to-reach tight spaces with short and right angle drills.

DEWALT DWASHRIR Impact Ready Shears Attachment #ad - 135 degree standard tip design delivers powerful penetration against metals, plastics and other hard surfaces. Each stubby bit measures from 1. 9 inches to 2. 32 inches for working in hard-to-reach tight spaces with short and right angle drills. This attachment works with most 18V-20V impact driver and drills, regardless of brand.

Attachment only, drill not included. The dewalt dwashrir impact ready shears attachment is able to cut up to 18GA material including but not limited to: Sheet metal, steel mesh, wire, corrugated sheet metal, asphalt shingles, duct, plastics, vinyl siding, cardboard and rubber.

More information about Dewalt DWASHRIR #ad


Similar products



DEWALT DWA2T40IR IMPACT READY FlexTorq Screw Driving Set, 40-Piece

#ad
#ad
Dewalt DWA2T40IR #ad - Each stubby bit measures at a length of 2. 3 inches for working in hard-to-reach tight spaces with short and right angle drills. True 90 degree right angle head for versatility. Compatible with most 18V-20V impact driver and drills. Short bits are constructed of 4241 high speed steel for fast cutting against tough wood material.

Short bits are constructed of premium molybdenum M2 high speed steel with evenly distributed carbides for resistance against wear. 10x magnetic Screw Lock system. Brad point tip design delivers accuracy when drilling through surfaces. Connects via standard 1/4-inch hex shank. Flexor allows bits to flex up to 15 degrees which equals increased durability and reduced breakage for longer bit life.

DEWALT DWA2T40IR IMPACT READY FlexTorq Screw Driving Set, 40-Piece #ad - The 6pc drill bit set includes a hex shank holder and the following bit sizes: 3/32, 3/16, 1/8, 1/4, 5/16 and 3/8-inch drill bits. Able to cut up to 18GA material. These bits are durable and jobsite tough. Each stubby bit measures from 1. 9 inches to 2. 32 inches for working in hard-to-reach tight spaces with short and right angle drills.

More information about Dewalt DWA2T40IR #ad


Similar products



DEWALT DWPVTSET Pivot Holder Set with Bit Bar, 10-Piece

#ad
#ad
Dewalt DWPVTSET #ad - Minimizes Drops. 360 degree swivel head for maneuverability. Bit bar includes an assortment of Phillips, slotted and double-ended Impact Ready insert bits. Minimizes drops and reduces wobbling. 1/4-inch hex shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs.

All dewalt impact ready accessories are designed and optimized to withstand the high-torque output of cordless impact drivers. Flextorq allows bits to flex up to 15 degrees. Short bits are constructed of premium molybdenum M2 high speed steel with evenly distributed carbides for resistance against wear. Connects via standard 1/4-inch hex shank.

DEWALT DWPVTSET Pivot Holder Set with Bit Bar, 10-Piece #ad - Fasteners supported by magnet for 100% alignment. Each stubby bit measures at a length of 2. 3 inches for working in hard-to-reach tight spaces with short and right angle drills. Includes best in Class most common Impact Driver Accessories. 10x magnetic Screw Lock system. 1/4-inch hex shanks are compatible with both standard and quick change chucks drivers, providing versatility in drilling needs.

Short bits are constructed of 4241 high speed steel for fast cutting against tough wood material.

More information about Dewalt DWPVTSET #ad


Similar products



DEWALT DW1588 6-Inch Extension for DEWALT Spade Drill Bits

#ad
#ad
Dewalt DW1588 #ad - 1/4-inch hex shanks are compatible with both standard and quick change chucks drivers, providing versatility in drilling needs. Minimizes drops and reduces wobbling. The 6pc drill bit set includes a hex shank holder and the following bit sizes: 3/32, 1/8, 1/4, 3/16, 5/16 and 3/8-inch drill bits. Able to cut up to 18GA material.

Hang hole allows for bit storage & wire pulling. Reduces Wobbles & Breakage. Short bits are constructed of 4241 high speed steel for fast cutting against tough wood material. Cutting spurs provide optimum hole finish. Hex shank prevents slipping and fits all 1/4" quick change systems. Fasteners supported by magnet for 100% alignment.

DEWALT DW1588 6-Inch Extension for DEWALT Spade Drill Bits #ad - Each stubby bit measures at a length of 2. 3 inches for working in hard-to-reach tight spaces with short and right angle drills. 360 degree swivel head for maneuverability. Compatible with most 18V-20V impact driver and drills. All dewalt impact ready accessories are designed and optimized to withstand the high-torque output of cordless impact drivers.

Each stubby bit measures from 1.

More information about Dewalt DW1588 #ad


Similar products



COMOWARE Titanium Twist Drill Bit Set - 13 Pcs Hex Shank High Speed Steel for Wood Plastic Aluminum Alloy, 1/16"-1/4"

#ad
#ad
COMOWARE #ad - The 6pc drill bit set includes a hex shank holder and the following bit sizes: 3/32, 1/8, 3/16, 1/4, 5/16 and 3/8-inch drill bits. Able to cut up to 18GA material. Ideal for any Applications where Impact Drivers are used. Each stubby bit measures from 1. 9 inches to 2. 32 inches for working in hard-to-reach tight spaces with short and right angle drills.

1/4-inch hex shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs. Cutting spurs provide optimum hole finish. Hex shank prevents slipping and fits all 1/4" quick change systems. True 90 degree right angle head for versatility. The drill bits set fits the majority of brands currently on the market.

COMOWARE Titanium Twist Drill Bit Set - 13 Pcs Hex Shank High Speed Steel for Wood Plastic Aluminum Alloy, 1/16"-1/4" #ad - Includes new patented pivot hOLDER - Drive Straight or in Pivot Mode. Includes best in Class most common Impact Driver Accessories. Hang hole allows for bit storage & wire pulling. Hss titanium coating - classic hss construction with titanium coating for capability and durability. All dewalt impact ready accessories are designed and optimized to withstand the high-torque output of cordless impact drivers.

More information about COMOWARE #ad


Similar products



ARES 70207 | 12-inch Quick Release Bit Holder | Works With All 1/4-inch Drive Bits | Quick Release Mechanism Makes Changing Bits a Breeze

#ad
#ad
ARES #ad - The 6pc drill bit set includes a hex shank holder and the following bit sizes: 3/32, 3/16, 1/4, 1/8, 5/16 and 3/8-inch drill bits. Able to cut up to 18GA material. Connects via standard 1/4-inch hex shank. Design considerations: our quick release bit holder works with all 1/4-inch drive bits and features a magnetic locking design that ensures that your bits aren't going anywhere! The ergonomic black outer sleeve rotates freely for maximum stability.

How it works: this quick release bit holder's locking red sleeve combined with the magnetic retention allows you to get into those hard to reach areas without loosing your bits. Flextorq allows bits to flex up to 15 degrees. 10x magnetic Screw Lock. Stability in hard to reach areas the ares 12-inch Quick Release Bit Holder has everything you need to get into those hard to reach areas without straining your neck or back.

ARES 70207 | 12-inch Quick Release Bit Holder | Works With All 1/4-inch Drive Bits | Quick Release Mechanism Makes Changing Bits a Breeze #ad - Reliable | effective | efficient: users trust ares to be quality tools. The 12-inch-long reach will allow you to get into those hard to reach areas without straining your back and neck! Each stubby bit measures from 1. 9 inches to 2. 32 inches for working in hard-to-reach tight spaces with short and right angle drills.

The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.

More information about ARES #ad


Similar products



DEWALT DW2024B6 No. 2 Phillips/No. 8 Slotted Double Ended Bit, 6-Pack

#ad
#ad
Dewalt DW2024B6 #ad - Reduces Wobbles & Breakage. 10x magnetic Screw Lock. Includes new patented pivot hOLDER - Drive Straight or in Pivot Mode. Number of pieces: 6 pc. Includes best in Class most common Impact Driver Accessories. Shank Type: hex. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.

Flutes form - 2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process. Quick change - 1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck. Meet your demands - great drill bits set for metal/wood/plastic countersink.

DEWALT DW2024B6 No. 2 Phillips/No. 8 Slotted Double Ended Bit, 6-Pack #ad - When you're ready to eject the bit, simply push the sleeve up and you're set to swap it out! Our quick release bit holder also a features a free-spinning black sleeve to allow you to stabilize your bit while in use. 10x magnetic Screw Lock system. Reduces breakage and longer life. 360 degree swivel head for maneuverability.

Hardened core for extra strength and reduced breakage. Flexible shaft reaches nearly any space.

More information about Dewalt DW2024B6 #ad


Similar products