As an Amazon Associate I earn from qualifying purchases.
Ade Advanced Optics #ad - Powered by a lithium CR2032 battery. Powered by a lithium CR2032 batteryIncluded. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short.
It also fits canik using Canik provided mount marked for Doctor/Venom type red dot. This huracan green dot sight fits directly to optics ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP.
Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Ade rd3 006, rd3 015 are designed to fit the slide/footprint of plate made for Vortex Venom, RD3 009, burris fastfire, Insight, docter, rd3 012, rd3 013, meopta, Eotech MRDS. Any plate made for those brands also fits this sight. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief.
Ade Advanced Optics #ad - Every time you turn on the dot it stays the same brightness level last time it was turned off. Red dot has multi brightness level with one adjustment button. Shockproof, fogproof and waterproof for 30 minutes under 4ft water.
Feature 1 M. O. A wind age and elevation adjustments with audible click. 6 moa dot. Comes with an removable standard picatinny mount and handgun mountreplace rear sight fits certain sw models such as Smith &P 2.
The pistol mount included for sw does not fit smith &p shield ez. 380, m&p c. O. R. E series already optics ready, Sigma, SW9VE, M& Wesson M&P .22 compact, sw40, sw40ve, sw9, 1911. The red dot is also compatible with ade handguit is designed to fit the slide/footprint on the cut made for Vortex Venom, Meopta, Burris Fastfire, Docter, Insight.1. 75" length x1.
Ade Advanced Optics #ad - It stays on til use manually power off. Comes with mounting plate for ruger sr9, sr9c, sr40, sr40c, sr45 and also a standard picatinny mount. Top load system, no need to Remove the sight to change the Battery and re-sight in to waste ammo. Attention! this sr9 optic plate does not fit Ruger Security 9 pistol.
Does not fit ruger Security 9 which is a completely different pistol. Ruger sr9 and ruger Security 9 are completely two different pistols. Therefore ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
Every time you turn on the dot it stays the same B rightness level last time it was turned off. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Ade advanced optics model rd3-006, meopta, insight, rd3-009, rd3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Docter, rd3-012, Eotech MRDS, Burris Fastfire, RD3-013, Sightmark Minishot. Does not fit sr9e or SR22. 4 moa dot.
Ade Advanced Optics #ad - Unprofessional installation such as improper torque will result in screw loose, damage to the firearm/optic and personal injury. Fit ade rd3-006ahuracan, rd3-006bpython, rd3-012delta, rd3-009crusader, docter, meopta, insight, rd3-015zantitiumred dots. Update: inventory has fixed as of dec 28th.
Also fit vortex venom/viper, rd3-013bertrillium, Eotech MRDS, Burris Fastfire, Sightmark Minishot and similar red dots. This optic plate is made to replace the rear sight of g2c, G2s, PT111 G2, Millennium G2, G2, and TX22 Pistols.
Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree. Comes with screws and hardware for installation. All new shipment will be machined correct to fit tx22. This plate does not fit g3 with newer factory steel sight, g3c, please search "ADE G3C/GLOCK PLATE" on amazon. It does not fit the sights with Shield RMSC and trijicron rmr footprint.
Ade Advanced Optics #ad - 5 illumination Settings. Powered by a lithium CR2032 batteryIncluded. No need to replace the rear sight and allowing user to co-witness the rear sight. Scroll down to product Description to see the fitment list for Ruger Mark Series.
Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
Comes with one picatinny mounting plate and one ruger plate. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 moa. Plate will not work without holes. The red dot is designed to fit the slide/footprint on the cut made for Vortex Venom, Meopta, Docter, Burris Fastfire, Insight.
Ade Advanced Optics #ad - Come with protected Cover, Installation screws and Picatinny mounting plate. 6 moa dot. Please ask your pistol manufacturer which rear sight you have before purchasing. 1. 75" length x1. 25" width x1. 15" height. Shockproof, fogproof and waterproof for 30 minutes under 4ft water.
Feature 1 M. O. A wind age and elevation adjustments with audible click. The red dot is also compatible with ade handgun mounts for glock barreta hk ups sw mp sig p226 springfield ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45.
There are two types of rear sight on 1911 pistols. It is designed to fit the slide/footprint on the cut made for Vortex Venom, Burris Fastfire, Docter, Meopta, Insight. Every time you turn on the dot it stays the same brightness level last time it was turned off. Red dot has multi brightness level with one adjustment button. Top load system, adjustment dialing plate, adjustment wrench, user manual, no need to Remove the sight to change the Battery.
Ade Advanced Optics #ad - Top load system, adjustment dialing plate, user manual, no need to Remove the sight to change the Battery. It is designed to fit the slide/footprint on the cut made for Vortex Venom, Meopta, Burris Fastfire, Docter, Insight.
Shockproof, fogproof and waterproof for 30 minutes under 4ft water. Feature 1 M. O. A wind age and elevation adjustments with audible click. 1. 75" length x1.
Comes with mounting plate for springfield XD and also a standard picatinny mount. 6 moa dot. Every time you turn on the dot it stays the same brightness level last time it was turned off. Red dot has multi brightness level with one adjustment button. Come with protected Cover, Adjustment wrench, Installation screws and Picatinny mounting plate.
Ade Advanced Optics #ad - New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 BatteryIncluded. Ade advanced optics model rd3-006, rd3-009, eotech mrds, meopta, insight, rd3-015 are designed to fit the slide/footprint of mounting plate made for vortex venom, RD3-012, RD3-013, Docter, Burris Fastfire, Sightmark Minishot.
It stays on til use manually power off. Comes with mounting plate that replaces the rear sight dovetail of Sig P226, P2022 and also a standard picatinny mount.
Top load system, no need to Remove the sight to change the Battery and re-sight in to waste ammo. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. The plate does not fits other Sig models such as P320 and P360 Therefore ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
Bushnell #ad - Class leading value starts with multi-platform versatility with its DeltaPoint Pro mounting pattern, daylight bright 4 MOA dot with 8 settings, up to 5000 hours of battery life, side battery door, and an included Weaver-style low-rise mount.
Reflex sight rxs-100 has a clear 4 mOA dot with 8 brightness settings. Purpose built quality rugged aircraft grade durable aluminum construction, long lasting 5, 000 hour on mid-setting battery.
Ade Advanced Optics #ad - Powered by a lithium CR2032 batteryIncluded. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. Any plate made for those brands also fits this sight.
We have made it more durable to withstand recoil and improved the ability to hold zero. This green dot comes with a picatinny mounting base. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. We have made several improvements since it's initial release in 2016. Multi Illumination Settings. 3 moa. Ade model rd3-006, rd3-015 are designed to fit the slide/footprint of plate made for Vortex Venom, insight, meopta, RD3-009, rd3-012, burris fastfire, rd3-013, docter, Eotech MRDS.
1. Ade Advanced Optics
#adAde Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun
#adIt also fits canik using Canik provided mount marked for Doctor/Venom type red dot. This huracan green dot sight fits directly to optics ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP.
More information #ad
Multi Illumination Settings. Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Ade rd3 006, rd3 015 are designed to fit the slide/footprint of plate made for Vortex Venom, RD3 009, burris fastfire, Insight, docter, rd3 012, rd3 013, meopta, Eotech MRDS. Any plate made for those brands also fits this sight. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Weight | 0.4 Pounds |
| Part Number | rd3-006A |
| Model | rd3-006A |
More information #ad
2. Ade Advanced Optics
#adAde Advanced Optics Delta RD3-012 Red Dot Reflex Sight + Optic Mounting Plate for SW Smith Wesson MP/MP 2.0 Shield Pistol and Also a Standard Picatinny Mount
#adFeature 1 M. O. A wind age and elevation adjustments with audible click. 6 moa dot. Comes with an removable standard picatinny mount and handgun mountreplace rear sight fits certain sw models such as Smith &P 2.
More information #ad
0 compact, sd40ve, M&P 2. 0 full size, m&p compact, sd9ve, m&p full size, m& wesson M&P 22 Full Size, M&P Shied. The pistol mount included for sw does not fit smith &p shield ez. 380, m&p c. O. R. E series already optics ready, Sigma, SW9VE, M& Wesson M&P .22 compact, sw40, sw40ve, sw9, 1911. The red dot is also compatible with ade handguit is designed to fit the slide/footprint on the cut made for Vortex Venom, Meopta, Burris Fastfire, Docter, Insight.1. 75" length x1.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | RD3-012+F1 |
More information #ad
3. Ade Advanced Optics
#adAde Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight for Ruger SR9,SR9C,SR40C,SR40,SR45 Pistol
#adDoes not fit ruger Security 9 which is a completely different pistol. Ruger sr9 and ruger Security 9 are completely two different pistols. Therefore ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
More information #ad
The lowest setting is invisible by human Eye that is for using with a night vision. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 BatteryIncluded. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. Ade advanced optics model rd3-006, meopta, insight, rd3-009, rd3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Docter, rd3-012, Eotech MRDS, Burris Fastfire, RD3-013, Sightmark Minishot. Does not fit sr9e or SR22. 4 moa dot.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | RD3-013+SR9 |
More information #ad
4. Ade Advanced Optics
#adMillennium G2, Ade Advanced Optics Optic Mount Plate for Taurus PT111 G2, G2, burris fastfire, docter, G3 and TX22 to fit on Vortex Venom, eotech mrds, meopta, Insight Red Dot Reflex Sight
#adAlso fit vortex venom/viper, rd3-013bertrillium, Eotech MRDS, Burris Fastfire, Sightmark Minishot and similar red dots. This optic plate is made to replace the rear sight of g2c, G2s, PT111 G2, Millennium G2, G2, and TX22 Pistols.
More information #ad
This plate also fits Taurus G3 with Original Rear sightsee photo. Machined from aircraft grade aluminum with hard anodizing finish. We highly recommend diy only if user has gunsmith experiense, not holding zero, or hiring a gunsmith to install this optic plate. Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree. Comes with screws and hardware for installation. All new shipment will be machined correct to fit tx22. This plate does not fit g3 with newer factory steel sight, g3c, please search "ADE G3C/GLOCK PLATE" on amazon. It does not fit the sights with Shield RMSC and trijicron rmr footprint.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | G2 Plate -1 |
More information #ad
5. Ade Advanced Optics
#adAde Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Ruger Mark I,II,III,IV,IV-Lite,Mark 1,2,3,4 + Picatinny Plate
#adLenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
More information #ad
This mounting plate is designed to connect red dot sights to ruger mark i, iv-lite, 22/45 pistol by attaching to the two holes on top of the slide. For mark i and ii, iv, ii, iii, confirm it has drilled/tapped holes. Comes with one picatinny mounting plate and one ruger plate. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. 5 moa. Plate will not work without holes. The red dot is designed to fit the slide/footprint on the cut made for Vortex Venom, Meopta, Docter, Burris Fastfire, Insight.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | RD3-009-MARK |
More information #ad
6. Ade Advanced Optics
#adAde Advanced Optics Delta RD3-012 Red Dot Reflex Sight with Colt 1911 Standard Pistol mounting Plate
#adFeature 1 M. O. A wind age and elevation adjustments with audible click. The red dot is also compatible with ade handgun mounts for glock barreta hk ups sw mp sig p226 springfield ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45.
More information #ad
One is colt standard rear sight, another is Novak/Adjustable rear sight. This listing is for the Colt Standard Rear Sight. Comes with mounting plate for colt 1911 standard and also a standard picatinny mount. There are two types of rear sight on 1911 pistols. It is designed to fit the slide/footprint on the cut made for Vortex Venom, Burris Fastfire, Docter, Meopta, Insight. Every time you turn on the dot it stays the same brightness level last time it was turned off. Red dot has multi brightness level with one adjustment button. Top load system, adjustment dialing plate, adjustment wrench, user manual, no need to Remove the sight to change the Battery.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | RD3-012+B1 |
More information #ad
7. Ade Advanced Optics
#adAde Advanced Optics Delta RD3-012 Red Dot Reflex Sight for Springfield XD Pistol
#adShockproof, fogproof and waterproof for 30 minutes under 4ft water. Feature 1 M. O. A wind age and elevation adjustments with audible click. 1. 75" length x1.
More information #ad
25" width x1. 15" height. Does not fits xDS, XDM. The red dot is also compatible with ade handgun mounts for glock barreta hk ups sw mp sig p226 springfield ruger LC9 LC9s LC380 SR9 SR22 SR40 SR45. Comes with mounting plate for springfield XD and also a standard picatinny mount. 6 moa dot. Every time you turn on the dot it stays the same brightness level last time it was turned off. Red dot has multi brightness level with one adjustment button. Come with protected Cover, Adjustment wrench, Installation screws and Picatinny mounting plate.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | RD3-012+E1 |
More information #ad
8. Ade Advanced Optics
#adAde Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight for Sig Sauer P226 P2022 Pistol
#adIt stays on til use manually power off. Comes with mounting plate that replaces the rear sight dovetail of Sig P226, P2022 and also a standard picatinny mount.
More information #ad
The lowest setting is invisible by human Eye that is for using with a night vision. 4 moa dot. Red dot does not auto power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. Top load system, no need to Remove the sight to change the Battery and re-sight in to waste ammo. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. The plate does not fits other Sig models such as P320 and P360 Therefore ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Part Number | RD3-013+C1 |
More information #ad
9. Bushnell
#adBushnell RXS100 Reflex Sight, Durable with Long Battery Life, Red Dot Sight with 4 MOA and 8 Brightness Settings
#adReflex sight rxs-100 has a clear 4 mOA dot with 8 brightness settings. Purpose built quality rugged aircraft grade durable aluminum construction, long lasting 5, 000 hour on mid-setting battery.
More information #ad
Ideal for training/target shooting, home defense, Hunting. Additional features detented windage/elevation, MSRs, mounts on an array of pistols, top loading battery for easy replacement, and shotguns. The rxs-100 is the new market leader in price and performance.| Brand | Bushnell #ad |
| Manufacturer | Bushnell #ad |
| Height | 3.25 Inches |
| Length | 7 Inches |
| Weight | 0.14 Pounds |
| Width | 5 Inches |
| Part Number | RXS100 |
| Model | RXS100 |
| Warranty | BUSHNELL IRONCLAD WARRANTY |
More information #ad
10. Ade Advanced Optics
#adAde Advanced Optics RD3-006B Green Dot Micro Mini Reflex Sight For Handgun
#adWe have made it more durable to withstand recoil and improved the ability to hold zero. This green dot comes with a picatinny mounting base. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
More information #ad
It is also compatible to optics Ready pistols such as Glock MOS, Springfield OSP,. Designed in Oregon. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. We have made several improvements since it's initial release in 2016. Multi Illumination Settings. 3 moa. Ade model rd3-006, rd3-015 are designed to fit the slide/footprint of plate made for Vortex Venom, insight, meopta, RD3-009, rd3-012, burris fastfire, rd3-013, docter, Eotech MRDS.
| Brand | Ade Advanced Optics #ad |
| Manufacturer | Ade Advanced Optics #ad |
| Weight | 0.4 Pounds |
| Part Number | RD3-006B |
| Model | RD3-006B |
More information #ad
