Top 8 Inflator Hose Scuba – Diving Regulator Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Scuba Choice

#ad

Scuba Choice Scuba Diving 350PSI Low Pressure LP Hose for Standard BCD, 26"

#ad
Scuba Choice #ad - Working pressure: 350 PSI. Intermediate pressure hose for Standard BCDs. Available sizes: 18", 38", 24", 30", 36", 22", 20", 32", 28", 34", 26", 40".
BrandScuba Choice #ad
ManufacturerAqua Edge #ad
Height1 Inches
Length6 Inches
Weight0.1 Pounds
Width6 Inches
Part NumberSCLP-03-26
ModelSCLP-03-26
Warranty30 day warranty against manufacturer defects

2. Scuba Choice

#ad

Scuba Choice Scuba Diving 27" Nylon Braided BCD Low Pressure Hose

#ad
Scuba Choice #ad - For connecting with BCD. Braided hose more durable & 65% lighter than conventional rubber coated hoses. Features external nylon safety braiding designed to resist snags and abrasions.
BrandScuba Choice #ad
ManufacturerAqua Edge #ad
Height1 Inches
Length6 Inches
Weight0.02 Pounds
Width6 Inches
Part NumberSCBH-02
ModelSCBH-02
Warranty30 day warranty against manufacturer defects

3. Promate

#ad

Promate 25" Scuba Dive BC Inflator Regulator Hose with Quick Release Connector

#ad
Promate #ad - Full manufacturer's warranty!!! Standard fitting low pressure inflator hose. Hose 25" in length. Quick release connector.
BrandPromate #ad
ManufacturerPromate #ad
Part NumberBC250
ModelSG_B0038O8QC4_US

4. Scuba Choice

#ad

Blue, Scuba Choice 27-Inch Colored LP Low Pressure Braided Hose for Standard BCD

#ad
Scuba Choice #ad - For standard BCDs. Material: TPE. Working pressure: 1, 000 psi. Inner diameter: 6. 5mm. Burst pressure: 4, 000 psi. Outer diameter: 12. 5mm. Material: Polyester Mono Filament. Fitting tensile strength: 177kgf.
BrandScuba Choice #ad
ManufacturerScuba Choice #ad
Height5.12 Inches
Length1.97 Inches
Weight0.4 Pounds
Width0.39 Inches
Part NumberSCLP-150-BC-BL
ModelSCLP-150-BC-BL

5. Scuba Choice

#ad

Scuba Choice Scuba Diving 13" BCD BC Airway Corrugated Inflator Hose

#ad
Scuba Choice #ad - Easy to install. Works with most of the BCD's. A perfect replacement corrugated hose. Diameter is 7/8" and will fit 1" inflator. Length: 13".
BrandScuba Choice #ad
ManufacturerAqua Edge #ad
Height1 Inches
Length13 Inches
Weight0.24 Pounds
Width1 Inches
Part NumberSCCH-14
ModelSCCH-14
Warranty30 day warranty against manufacturer defects

6. Scuba Choice

#ad

Scuba Choice Scuba Diving 14" BC Flush Wash Hose

#ad
Scuba Choice #ad - Length: 14". The best solution for cleaning your BCD. Also works with bcd's with alternate air Inflators like the Oceanic Air XS or Tulsa Duo Air if you add an inflator adaptor. Easy to use.
BrandScuba Choice #ad
ManufacturerAqua Edge #ad
Height1 Inches
Length14 Inches
Weight0.4 Pounds
Width1 Inches
Part NumberSCFH-01
ModelSCFH-01
Warranty30 day warranty against manufacturer defects

7. XS Scuba

#ad

XS Scuba Miflex XT Tech QD BC Inflator Hose 25

#ad
XS Scuba #ad - Lighter in weight than traditional rubber hoses. Like all miflex hoses, they are 100% leak tested and produced on fully automated assembly lines. Less flexibility and negative buoyancy allow the longer hoses to stay in place. End fittings are made of sea water resistant electroless nickel plated brass. The smooth outer surface prevents abrasion around the neck. Outer polyester layer has Kevlar yarn reinforcement to make the hose stronger and more durable. Approved for use with up to 40% oxygen.
BrandXS Scuba #ad
ManufacturerXS Scuba #ad
Height1.3 Inches
Length6.1 Inches
Weight0.35 Pounds
Width8 Inches
Part NumberMXTQD25

8. XS Scuba

#ad

Xs Scuba Tl112 Bc Wash Out Hose

#ad
XS Scuba #ad - Fits inflators with standard male QD nipple. Inflate and allow to dry before storing. Wash the inside of your BC often. Give the bc a good shaking. Fill about half way with fresh water to fully rinse inside. Invert the bc, drain the water and debris out by depressing the oral inflator button.
BrandXS Scuba #ad
ManufacturerXS Scuba #ad
Height0.6 Inches
Length5 Inches
Weight0.3 Pounds
Width6.3 Inches
Part NumberTL112
ModelTL112