As an Amazon Associate I earn from qualifying purchases.
sjlerst #ad - Repaired microphone volume/impedance problem with earphones used with commercial PTT and radio. Made of high quality ABS material, sturdy, durable and long service life.
Hozee #ad - Repaired microphone volume/impedance problem with earphones used with commercial PTT and radio. Power source type: Corded Electric. Spare electret capacitive hanger rod microphone, suitable for Armorwerx/Peltor Comtac and similar earphone.
COMBATGEAR #ad - Boom mic - suitable for airsoft comtac headsets. Note that if sound is not transmitted from the microphone, you can plug the jack in backwards and adjust the position of the positive and negative terminals.
Type - kit is compatible with ComTac XPI shooting headsets. Gear connector kit will convert ear protection into communicated earmuffs.
COMBATGEAR #ad - Bendable mic will help you adjust mic easily. Axu plug, pelto tactical 300, 500 headset, connector kit compatible with howard leight safety earmuffs, EM054 hearing protection of ZOHAN.
Hearangel #ad - The arc track has been installed beneath the side of the helmet, making it easier to modify the position of the tactical headsets. Rail adapter for arc rail, from headband verion to helmet mounting version, offer user-friendly experience.
Retevis #ad - Comfortable to wear; comtac headset with high-quality soundproof sponge and leather ear pads; good sound insulation; provide a good communication environment.
Adjustable telescopic rack; you can adjust to your width; save your space when not be used. Effectively reduce noise; automatically turn off the pickup function when encountering sudden gunshots and explosions; effectively reduce ambient noise.
PROHEAR #ad - Designed for lasting: prohear gep01 gel ear cushions have an ultra thin sheet of polyurethane provides a supple outer skin. We have your back: we make customer satisfaction as our top priority, If you are not satisfied with the GEP01 gel pads or feel that the ear pads do not fit your headsets, then please do not hesitate and reach out to us through Amazon at any time for either a refund or replacement.
So please be patient when installing and then you will get upgraded earmuffs. Our gel ear pads could last for several years of normal use, you could clean the outer surface with soapy water as necessary, not as easily damaged as faux leather or vinyl pads.
And the anti-sweat gel ear pads are easy to clean, but do not submerge, as the pads have a pinhole-sized air vent on the side of the pad to allow proper functioning. Compatible models: these are upgraded gel ear pads that they could use on a wide variety of 3m peltor headsets including 3M WorkTunes hearing protectors, 033/PROHEAR 037, BUT THEY DON'T FIT THE Optime 105 Earmuffs H10A + ZOHAN EM042, 033 headsets and provide significantly better softness and sealing. Package&attention: includes gel ear pad with plastic adapter plates* 2 for earmuffs We specifically widened and thickened the plastic base to increase the tightness of your headsets.
Team Wendy #ad - Wiring is easily routed in or outside the helmet shell. Works with all peltor comtac systems and a variety of other brands and models, includes one boom microphone adapter. Eliminates rigid metal headband providing better fit and comfort.
1. Armorwerx
#adReplacement Boom Mic Compatible with Peltor Comtac Style Headsets
#adArmorwerx #ad - Made by Armorwerx. Replacement electret condenser boom mic fits Armorwerx, Peltor Comtac, and similar headsets. Plug & Play installation.More information #ad
Suitable for comtac iI, Comtac III, Comtac IV. Fixes mic volume / impedance issues issues when using military Peltor Comtac headsets with commercial PTT's and radios.| Brand | Armorwerx #ad |
| Manufacturer | The Mercenary Company #ad |
More information #ad
2. sjlerst
#adSjlerst Sturdy 2 Pin Microphone, for Peltor Comtac Comtac Ii Comtac Iii Armorwerx, Long Service Life Headset Microphone
#adMore information #ad
Professional manufacturing, good performance and clear sound. Suitable for comtac ii/comtac III/Comtac IV, plug and play installation. Spare electret capacitive hanger rod microphone, suitable for Armorwerx/Peltor Comtac and similar earphone.| Brand | sjlerst #ad |
| Manufacturer | sjlerst #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Width | 0 Inches |
| Part Number | sjlerstx6mdbp5iyt |
More information #ad
3. Hozee
#adClear Sound Plug and Play for Comtac Comtac Iii Comtac Ii Armorwerx, Tactics Microphone, Long Service Life Black Black Z Tactics Microphone
#adMore information #ad
Suitable for comtac ii/comtac III/Comtac IV, plug and play installation. Professional manufacturing, good performance and clear sound. Made of high quality ABS material, sturdy, durable and long service life.| Brand | Hozee #ad |
| Manufacturer | Hozee #ad |
| Height | 0.39 Inches |
| Length | 0.39 Inches |
| Weight | 0.06 Pounds |
| Width | 0.39 Inches |
| Part Number | Hozee7u3e5rgvxw1746 |
| Model | Hozee7u3e5rgvxw1746 |
More information #ad
4. COMBATGEAR
#adY Cable Connector Boom Microphone Kenwood U94 PTT Compatible with COMTA Headsets Short
#adType - kit is compatible with ComTac XPI shooting headsets. Gear connector kit will convert ear protection into communicated earmuffs.
More information #ad
Not recommend to use it separated because of different version of adapter. Installation - connect the jack of the cable to the jack of the headset correctly, and then connect the intercom to communicate correctly. Kenwood ptt - u94 system ptt 2 pin，will compatible with baofeng talkie walkie, z-tac tactical headset.| Brand | COMBATGEAR #ad |
| Manufacturer | COMBATGEAR #ad |
More information #ad
5. COMBATGEAR
#adY Cable Connector Boom Mic Ken U94 PTT for Howard Leight Safety Earmuffs Convert into Communicated Headset
#adMore information #ad
Ptt is u94 system kenwood plug, compatibel with baofeng radio. Be easy to install and remove, WILL not change a lot for your tactical headsets. Gear kit will convert ear protection into communicated earmuffs. Be adjust position of microphone by velcro.| Brand | COMBATGEAR #ad |
| Manufacturer | COMBATGEAR #ad |
More information #ad
6. Hearangel
#adHearangel ARC Rail Adapter Accessories for Comta ii Comta iii Tactical Headsets
#adMore information #ad
With a full 360-degree rotative design, save space while no using. Rails of adapter can match with arc rail, micH helmet, etc, ACH helmet, many range of Ops-Core FAST helmets, which has arc rail on side. Compatibel with comta ii comta iii airsoft headsets, easy to install, more comfortable using experience.| Brand | Hearangel #ad |
| Manufacturer | Hearangel #ad |
More information #ad
7. Retevis
#adAutomatic Sound Pickup 2 Way Radio Headset for Shooting1 Pack, Compatible with Retevis RT22 RT21 H-777 RT68 Baofeng UV-5R Walkies Talkies, Retevis EHK007 Noise Reduction Walkie Talkie Headset
#adAdjustable telescopic rack; you can adjust to your width; save your space when not be used. Effectively reduce noise; automatically turn off the pickup function when encountering sudden gunshots and explosions; effectively reduce ambient noise.
More information #ad
Tactical headset; excellent for tactical game; airsoft sports; shooting game; utv game; racing games or for people who need to talk in a noisy environment. Automatic sound pickup; two pickup microphones on the left and right; will not completely isolate the external sound; amplify the environmental sound effiectively.| Brand | Retevis #ad |
| Manufacturer | Retevis #ad |
| Height | 4.3 Inches |
| Length | 7.49 Inches |
| Width | 5.71 Inches |
| Part Number | FC9152A |
| Model | FC9152A |
More information #ad
8. PROHEAR
#adPROHEAR GEP01 Gel Ear Pads Upgraded for 3M PELTOR Headsets
#adSo please be patient when installing and then you will get upgraded earmuffs. Our gel ear pads could last for several years of normal use, you could clean the outer surface with soapy water as necessary, not as easily damaged as faux leather or vinyl pads.
More information #ad
Easy&quick installation: you should remove the original ear pads together with the plastic base, then put PROHEAR gel ear pads with plastic base into the earmuff and press down on the edge of plastic base of earpad to secure it Please check the images which would show you how to replace and install the ear pads. And the anti-sweat gel ear pads are easy to clean, but do not submerge, as the pads have a pinhole-sized air vent on the side of the pad to allow proper functioning. Compatible models: these are upgraded gel ear pads that they could use on a wide variety of 3m peltor headsets including 3M WorkTunes hearing protectors, 033/PROHEAR 037, BUT THEY DON'T FIT THE Optime 105 Earmuffs H10A + ZOHAN EM042, 033 headsets and provide significantly better softness and sealing. Package&attention: includes gel ear pad with plastic adapter plates* 2 for earmuffs We specifically widened and thickened the plastic base to increase the tightness of your headsets.
| Brand | PROHEAR #ad |
| Manufacturer | PROHEAR #ad |
| Height | 0.87 Inches |
| Length | 4.3 Inches |
| Weight | 0.19 Pounds |
| Width | 3.3 Inches |
| Part Number | GEP01 |
| Model | GEP01 |
| Warranty | 1 Year warranty |
More information #ad
9. Team Wendy
#adEXFIL Peltor Quick Release Adapter Kit
#adMore information #ad
Open and closed positions allow quick donning and doffing of helmet. Tool-free attachment directly to the quick release slot on the EXFIL Rail 2. 0, exfil rail 3. 0 and exfil sar Rail Systems.| Brand | Team Wendy #ad |
| Manufacturer | Team Wendy #ad |
| Weight | 0.15 Pounds |
| Part Number | 80-CAK-MIC |
More information #ad
